PVC Fire Hose

 

PVC Lining Fire Hose is a kind of equipment used in firefighting work, mainly used for water supply and fire extinguishing.PVC fire hose is one of the essential equipment in the fire protection industry, which can be used in fire fighting, rescue, water source transportation and other fire fighting work.

 

Construction: ° 100% Polyester filament jacket ° Polyvinyl chloride(PVC) Lining       Application: ° Fire fighting ° Irrigation ° Construction site ° Garden       Properties: ° Most popular type worldwide ° Thick and heavy ° Economic price ° Lining thickness and weight by customized       Standard Length: °10m-100m by customized       Temperature Range: ° 0℃ to 40℃

 

 

1. The jacket of fire hose is wove by high intensity of polyester filament or polyester short-fiber.

2. There are special adhesive between the jacket and the hose. The hose is soft and highly polished to reduce the flow resistance.

3. Thinner and more soft, lighter and more convenient to use.

4. High pressure resistance, low temperature resistance, anti-corrosion, aging resistance, wear-resisting.

5. Different color lining we can provide: blue, black, transparent, etc or according to your requirement.

6. The length we can provide: 10m - 100m or according to your requirement.

 

Size：	1",1.5",2",2.5",3",4",6"
Nominal Diameter(mm)	DN40,DN50,DN65,DN80,DN100,DN150
Rated Work Pressure(MPa)	0.8,1.0,1.2,1.3,1.4,1.6
Hose Length(m)	15,20,25,30 (according to your requirement)
Inside Lining Material	nature rubber, copy rubber,PVC,TPU

 

 

1. The fabric layer of the hose should be woven evenly, with a clean surface, without double warp skipping, broken double warp, skipping weft and scratches.

2. The thickness of the hose lining (or outer cover) should be uniform, and the surface should be smooth and flat without wrinkles or other defects

 

Elongation and expansion and twist direction
1. For hoses with design working pressures of 0.8MPa, 1.0MPa, 1.3MPa, and 1.6MPa, the axial elongation and diameter expansion rate should not be greater than 5% under the design working pressure.

2. For hoses with design working pressures of 2.0MPa and 2.5MPa,the axial elongation and diameter expansion rate should not be greater than 8% under the design working pressure.

3. Under the action of water pressure, the water belt should not be twisted counterclockwise when viewed along the water flow direction.

 

http://www.sjfirehose.com/